Asphalt paving in Boerne, TX is mostly long driveways, ranch roads and private lanes on Hill Country acreage, plus parking lots and repairs in town. Kendall County sits on the Edwards Plateau, where thin soil covers limestone, so most Boerne jobs come down to working through rock, building a firm base and controlling runoff on sloped ground.
Boerne is about 31 miles up I-10 from downtown San Antonio. The crews and standards behind our San Antonio asphalt paving contractor work cover the city and the county roads around it.
What Paving Services Do We Offer in Boerne?
Boerne driveway paving usually means a long drive, so the right surface depends on its length, its slope and the traffic it carries:
- Chip seal paving: a stone-finish surface that suits long driveways and ranch roads, costs less than hot mix over a long distance, and blends in with rural property.
- Asphalt millings driveways: recycled asphalt graded and rolled into a firm, low-dust drive, a common first upgrade from gravel or caliche.
- Asphalt driveway paving: smooth hot mix near the house, on steep sections and wherever vehicles turn sharply.
- Asphalt repair: washed-out edges, potholes and soft spots after heavy rain moves across a slope.
- Commercial paving: private roads, gated-community streets and equipment yards in Kendall County.
- Parking lot paving: lots for churches, offices, shops and restaurants in town and along I-10.
- Sealcoating: protection for existing hot mix lots and drives before the sun dries the surface out.
How Do Boerne’s Limestone and Runoff Affect Asphalt?
Limestone close to the surface
Kendall County is rolling to hilly land on the Edwards Plateau, roughly 1,000 to 2,000 feet above sea level, and the plateau is known for thin soil over limestone. Limestone caves such as Cascade Caverns and Cave Without a Name are within about 10 miles of town. For a driveway, shallow rock is a strong foundation, but it changes how the job is done. We may need to break or mill rock to reach the right grade, and we fill low spots with compacted crushed limestone base instead of loose native soil, which washes out on a slope.
Cibolo Creek and fast runoff
Cibolo Creek runs through Boerne, and Hill Country rain moves quickly once it starts. In July 2026, flooding along the creek led to water rescues, evacuation advisories along River Road and closed low-water crossings around town. On sloped acreage, we shape a crown so water sheds to both sides, cut ditches where the drive runs across the hill, and set culverts where the driveway crosses a drainage path, so runoff passes under the pavement instead of cutting across or under it.
Steep grades and heavy trucks
Many drives in the hills climb or drop sharply from the road. Delivery trucks, horse trailers and propane trucks put heavy loads on those slopes, especially at the bottom where they brake and turn. We thicken the base where loads concentrate, and on steep pitches we usually recommend chip seal or hot mix over millings because they hold traction and stay in place better in rain.
Areas We Serve, From Main Street to the SH 46 Ranch Country
We work inside Boerne city limits and across the surrounding parts of Kendall County, including:
- Historic downtown along Main Street and the Hill Country Mile
- Esperanza, the master-planned community along SH 46
- Cordillera Ranch, the large Hill Country community east of Boerne
- Neighborhoods off Herff Road and River Road near Cibolo Creek
- The area around Boerne City Lake
- Ranches and acreage along SH 46, I-10 and the county roads outside town
Who Approves Driveway Work in Boerne and Kendall County?
Inside city limits, the City of Boerne requires a right-of-way permit for driveways, sidewalks and other flatwork built in a public right-of-way or easement. The application goes in with construction plans and certificates of insurance, and a separate building permit can apply to some projects.
Many Boerne-area homes are outside city limits, and Esperanza, for example, sits outside the city even though Boerne provides its utilities. For those properties, Kendall County requires an Access (Driveway) Permit before a driveway that connects to a county road is built or changed. Access to a state highway such as SH 46 or the I-10 frontage roads goes through TxDOT instead. If you live in a gated or planned community, check its approval process as well. We confirm which office covers your address, and what it currently requires, before we start.
Homes, HOAs and Businesses in Boerne
The Edwards Plateau has long been grazing country, and that rural character still shapes the kinds of paving Boerne-area properties need:
- Acreage homes and ranchettes: long drives off county roads, often with a turnaround or parking pad near the house.
- Ranch and lease roads: working roads that need a firm, drainable surface more than a smooth black finish.
- Planned communities: driveways, cul-de-sacs and common areas in newer developments such as Esperanza.
- Downtown and I-10 businesses: small lots for shops, offices, restaurants and churches that need patching, sealcoating and fresh striping.
- Gated communities: private streets and entry drives maintained by an association instead of the city.
We'll walk the drive, look at the rock, slope and runoff, and price chip seal, millings or hot mix side by side. Mon–Sat: 7:00 AM – 6:00 PM.
What Does a Long Driveway Cost to Pave in Boerne?
Boerne jobs use the same price ranges as the rest of our service area. Length is usually the biggest factor, followed by how much rock or base work the route needs and how far trucks have to haul material. You can compare every surface in our paving cost guide.
| Project | Typical range |
|---|---|
| Chip seal driveway | $2 – $5 per sq ft |
| Recycled asphalt millings driveway | $1.50 – $3.50 per sq ft |
| New asphalt driveway (base + 2–3″ hot mix) | $4 – $7 per sq ft |
| Long rural driveway, hot mix (12 × 300 ft) | $14,400 – $25,200 |
| Same rural driveway, chip seal | $7,200 – $18,000 |
| Pothole / patch repair | $5 – $12 per sq ft |
Estimated 2026 ranges for the San Antonio area, not a quote. Travel and access can affect the final price.
Boerne Asphalt Paving FAQs
Does Boerne require a permit for driveway work?
Inside city limits, driveway work in a public right-of-way or easement needs a City of Boerne right-of-way permit. Outside the city, Kendall County requires an Access (Driveway) Permit for a new or changed connection to a county road, and TxDOT handles state highways. We find out which applies before any work begins.
What’s the best paving option for a long driveway in Boerne?
For a long, low-traffic drive, chip seal or recycled asphalt millings usually cost far less than hot mix and suit the rural setting. Many owners pick hot mix only for the steep part and the area by the house, then chip seal the rest. We’ll price the options side by side during the estimate.
How does the rock under Boerne affect paving?
Shallow limestone makes a solid foundation, so we rarely see the deep base failures common on clay. The tradeoff is excavation: rock takes longer to cut, and low spots need imported, compacted base. We check the depth to rock on site, since it changes both the schedule and the price.
Can you add a culvert where my driveway crosses a ditch?
Yes. Where a drive crosses a roadside ditch or drainage path, a culvert lets runoff pass under the pavement instead of washing over it. Kendall County publishes a culvert headwall detail among its road standards, and we build to whatever the reviewing office requires for your location.
Do you work in Esperanza, Cordillera Ranch and Fair Oaks Ranch?
Yes. We work in Esperanza, Cordillera Ranch and the rest of the Boerne area, as well as nearby Fair Oaks Ranch, Comfort and Bulverde. If your property is deeper in Kendall County, call us with the address and we’ll confirm right away.
How quickly can someone look at my Boerne property?
There’s no charge for the visit. Use the form or call 123456, and we’ll arrange a time to walk the driveway or lot with you. On long drives, we measure the full length and note rock, slopes and drainage, then send a written quote with each surface option priced separately.
Nearby Areas We Serve
From Boerne, SH 46 runs east to asphalt paving in New Braunfels, and I-10 heads southeast toward San Antonio, where we work in Stone Oak and farther out in Schertz. The full list of places we work is on our service areas page. Closer to San Antonio, we also cover Helotes, and nearby towns such as Comfort, Fair Oaks Ranch and Bulverde.
